Joined in 2023 
82 
63 About this deal
APRS HOST – APRS stands for Amateur Packet Reporting System and allows data like GPS coordinates, altitude, speed, etc to be reported to other amateurs. Setting it up was very straightforward and within a few minutes, I had it all up and running and working perfectly with my handheld. We can also see the Display setting here too but for now we will just leave this and come back to it a little later on. org/blog/mmdvm-2/manual-flash-firmware-fm-network-87 MMDVMHost full edit in W0CHP pi-star: http://pi-star/admin/advanced/fulledit_mmdvmhost. Hotspots have been quite a recent addition to the Amateur hobby but it has grown more and more popular, starting with the likes of the DV4 Mini and now Pi-Star!
I wanted a hotspot for ages as I have had the use of Waynes Tytera MD380 DMR radio and more recently the amazing Ailunce HD1! Are there any other small computer boards other than Raspberry Pi boards that will run on the Pi-Star software and use the MMDVM Hat. This screenshot was taken before I changed to the US Brandmeister 3108 Server which is why it says “BM United Kingdom” as the DMR Master.Although transceiver suffers from overheating if used for TX as well(in case of hotspot), due to lack of a blower.
Now let’s look at the software side of things, everything I will show you is totally free so you have no outlay here, good to know!Use the same script, but have it run after the Pi is completely booted and add a line to restart the MMDVMHost service. The DB25 connector was used in this case because I can unplug the MMDVM and plug in the DMK URIxfor analog all-star. On this web site we will talk about how these different projects are being pulled together to make them stronger and easier to use.
It’s the most complete package I’ve seen and is widely recommended by other hams running digital repeaters. So Calibration Frequency Offset is very necessary , especially in old GM300 and Motorola digital radio. And yes, I know this is going to ignite some angst within some of you who hate programming codeplugs, but I promise we’ll get into that when I review my new Radioddity GD-77 soon. Uses Pi-Star digital software, the unit comes with an 8GB TF card, you can go to the PiStar web site, input your SSID and Password, this will create a new config.As for the issue with the self-assigned IP address over the ethernet connection, it doesn’t appear to matter. Setup Pi-star: This video by W1MSG is an excellent video that goes over the initial setup of pi-star.
You do not need the screen, the hotspot can fully function without it if you don’t want to have one. In particular: For Motorola, Hytera DMR devices, frequency offset causes Repeater, Broken QSO to fail to open.
TM-D710G WORK WORK W4DHW - Currently being used on D-Star, DMR and P25 as higher power hotspot with STM32_DVM board.
Great Deal 
New Comment